Black Forest Industries Releases Passenger Side Engine Mount for All 2.5-liter 5-Cylinder

After a lengthy period of design and testing, Black Forest Industries is pleased to announce the release of their complete replacement engine side mount for Mk5 and Mk6 Golf/Jetta 2.5-liter 5-cylinder vehicles and Audi TT-RS. This mount will completely replace your old, tired hydraulic engine-side motor mount. The weakest of the three engine mounts, the passenger side factory mount is fluid filled to create a softer, cushier ride. This softness is a detriment to performance and overall longevity as the fluid within the mount can often cause premature failure. BFI eliminates this possibility by replacing the mount completely with a proprietary bushing and bracket design.

Maximizing bushing area to minimize vibration where possible gives the BFI 2.5-liter mount the advantage of having the best ride characteristics possible from a urethane bushing mount. Utilizing laser scanning technology, Black Forest is the first to offer a solution that gives a factory fit and finish to each mount. All bosses are matched replicas of the stock locations, and all tool clearances and specs are maintained.

Stage 1, with its 65a durometer (yellow) bushings, is geared towards the spirited enthusiast who wants better control over motor movement without the sacrifice of excessive vibrations. It is our recommendation for all 5-cylinder street cars.

Stage 2, with its 85a durometer (black) bushings, is designed for the hardcore enthusiast who is more concerned with performance than cabin vibration. It is a great choice for spirited runs and track cars.

Each engine bracket employs a double interlock design. When assembled it doesn’t simply rely on the shear strength of the bolts holding it together, it is doubly supported. The inner tubes nest into the recesses of the center portion of the bracket, and the arm is, in turn, notched to allow the center portion to nest inside the arm. This double interlock design removes shear stress from the bolts and makes the mount much stronger as a whole. Two pieces “lock” together when mated and the socket bolts are under assembly tension load.


Black Forest Industries

1000 E. Chatham St.

Cary, N.C. 27511

Phone: (919) 468 – 5400

Fax (919) 859 – 9734