New German Performance Releases Type II Coilover Suspension System Share Comments Thread (100) New German Performance has announced the release of their Type II Coilover System, which improves upon their Type I kit by offering dampening adjustability up front, with stiffer spring rates at all four corners. Designed for more aggressive drivers with light track usage in mind, the Type II comes in at an extremely competitive price point and are covered by a two year warranty. Read the full Release below. After a long and rigorous testing period, NGP is proud to announce the addition of our latest suspension system: the Type II Coilovers for Mk5, Mk6, B6 Passat/CC, Audi A3 8P and Mk2 TT (FWD) models. Initially available at only $1199.99, these are priced very competitively to similar coilover kits such as those from H&R, Koni, Bilstein and KW.Featuring significantly stiffer spring rates and dampers than our Type I system, the Type II’s are designed with the more aggressive driver in mind. In addition to the stiffer shocks and springs, the Type II’s also feature adjustable front dampers for that extra fine tuning capability. Whether you’re at a weekend track event, running an autocross course, or just simply like to go extremely low, our Type II coilovers will more than meet your needs.What’s the big difference between the Type I and Type II coilovers?While our Type I system is designed for drivers who want a great blend of ride quality and handling ideal for the average daily driver and sporting enthusiats, our Type II system is designed with the more aggressive driver in mind. The first big difference are the springs: while the Type I coilovers feature progressive rate springs which are suitable for the street, the Type II’s utlize a linear racing-type spring system with much higher base rates. To match this increase in spring stiffness, the Type II’s have firmer twin tube dampers, with adjustable rebound damping in the front. Additionally the front housing is shorter, allowing for a lower ride height with no comparable loss in suspension travel. These changes make for a significant difference in performance, handling and lowering capabilities over our Type I coilovers, while having a much more aggressive ride and appearance.Please note, you cannot get to stock or near-stock ride heights with this suspension. Custom rear spring solutions for those wanting more ride height at the rear are in development, please contact firstname.lastname@example.org with any questions.Features: Ride height adjustable from 50-85mm* (1.9-3.25″) Made in Germany Adjustable front damping Custom calibrated Linear rate front and rear springs (70nm/400lb spring rate) High grade corrosion resistant steel housings with zinc plating Twin tube low pressure shock design Fully Powdercoated high quality alloy springs 2 year limited warranty Fitments: Volkswagen Golf and Jetta (MK5) Volkswagen Golf and Jetta (MK6) Volkswagen Passat/CC (B6) Audi A3 FWD (8P) Audi TT FWD (MK2) If you’d like to schedule an install for a set of our new Type II coilovers, or if you just have a few questions, please feel free to contact us.Check out the Type II Coilovers on our online store!