Revo Releases Big Brake Upgrade Kit

Improves stopping power under any condition!

Revo recommends increased braking performance any time you are adding more power to your vehicle. If you’re capable of achieving higher speed, your vehicle needs to deal with that speed safely and reliably.

The Revo by Alcon Big Brake Kit is engineered to improve your vehicles stopping power in any condition. Our Big Brake Kit is derived from race winning technology and capable of delivering consistent stopping power whether coming up to a stoplight or a 2nd gear corner at the end of a 140mph straight on your favorite track, you can rely on this system stop after stop!

Brake Calipers:


Revo by Alcon Calipers are cast from one piece of aluminum. The single casting design creates an incredibly stiff monoblock caliper. This monoblock design means significantly less flex in the caliper than other manufacturing processes and allows for less pedal travel as the brake fluid is only applying force to the Pistons and not flexing the body of the caliper itself. In short, more of your braking effort is translated directly from your foot, to the Pistons, to the pads and then to the rotors. This leads to improved and repeatable braking performance.

Floating Rotors:

A “Floating Rotor” design has been used all over the world in motorsport applications for many years. The rotors found on most race vehicles have too much float for a daily driven vehicle causing more noise than most would want from their road car. We have engineered a unique noise reducing method which eliminates noise while allowing for the thermal expansion associated with repeated high speed braking.


  • Eliminates fade & warping
  • Quicker reaction time
  • Improved pedal feel
  • Lightweight
  • Lower long-term maintenance costs
  • Easy installation



  • Revo by Alcon Caliper x2 (3.3 Kg Each)
  • Revo by Alcon Disks x2 (7.66 Kg Each)
  • 6061 Aluminum Anodized Bell x2
  • 6061 Aluminum Anodized Caliper Bracket
  • Revo Stainless Steel Braided Brake Lines
  • Motul Dot 5.1 Brake Fluid
  • Ferodo DS Performance Brake Pads


To ensure our brake kit would meet the constant high stress driving of track days, sprints and fast road driving we punished our kits to the maximum. Constant heavy braking testing was carried out to ensure no fade occurred back to back against stock braking system on our MK7 VW Golf R. As well as the track testing 10 runs of back to back 60-0mph and 100-0mph was done to show the benefit of the Revo braking system. As well as measuring the stopping distances and times over the 10 runs of each speed thermal testing was also done to show the difference in heat displacement over our 2 piece floating design against a factory 1 piece design

View our full test results, here.