I just put them on this wekend and I was wondering if anyone has. I have a couple of questions for those of you that have. First, I put the calipers on upside down, upside down meaning the bleeder value is on the top instead of the bottom. I haven't noticed anything different as far as pulling to one side or anything like that. I just wanted to hear some feedback. Thanks
Anyone ever put Girling 60 Dual piston calipers on a GTI
RiveraR30
1 - 5 of 5 Posts
I just put them on this wekend and I was wondering if anyone has. I have a couple of questions for those of you that have. First, I put the calipers on upside down, upside down meaning the bleeder value is on the top instead of the bottom. I haven't noticed anything different as far as pulling to one side or anything like that. I just wanted to hear some feedback. Thanks
Joined
·
2,242 Posts
Re: Anyone ever put Girling 60 Dual piston calipers on a GTI (RiveraR30)
i have them on my GTi and they stop you on the drop of a dime! got my whole setup for $120
![Image]()
![Image]()
i have them on my GTi and they stop you on the drop of a dime! got my whole setup for $120
Joined
·
1,315 Posts
Re: Anyone ever put Girling 60 Dual piston calipers on a GTI (RiveraR30)
upside down? I don't think so. bleeder is to go on top like you discribe. I have the calipers but yet to install them. also from what I found the pads are the same between a audi 5000 and the 5000T.
upside down? I don't think so. bleeder is to go on top like you discribe. I have the calipers but yet to install them. also from what I found the pads are the same between a audi 5000 and the 5000T.
Re: Anyone ever put Girling 60 Dual piston calipers on a GTI (RiveraR30)
From what I've been told there are 2 different Girling 60's, some have the bleeder on top and the others don't. Only reason I think mine are upside down is becasue the bigger of the 2 pistons is on the bottom, when it should be on the top. The smaller piston is supposed to trail the bigger one.
From what I've been told there are 2 different Girling 60's, some have the bleeder on top and the others don't. Only reason I think mine are upside down is becasue the bigger of the 2 pistons is on the bottom, when it should be on the top. The smaller piston is supposed to trail the bigger one.
1 - 5 of 5 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
