VW Vortex - Volkswagen Forum banner
1 - 8 of 8 Posts

a_riot

· Registered
Joined
·
7,692 Posts
Discussion starter · #1 ·
Any one have a write up on how these are installed on a Corrado front and rear? What stock pieces are kept and what are not needed? Any other parts that are needed other than the coilovers themselves?
Thanks,
Paul
 
Re: Koni coilover installation instructions (a_riot)

1. get air tools
2. get six pack of beer
Image

3. take off bolt on top of front struts (22 or 24mm)
4. take off 2 bottom bolts on front struts.(18mm or 19mm)
5. finish beer, open 2nd beer
Image
Image

6. replace all the stuff you just took off
7. take off top and bottom bolt on rear strut.
8. replace the shizzle you took off the back
9. drink your 3rd beer
Image
Image
Image

10. raise and lower the car a million times to adjust your coils
11. wash, lather, rinse
12. enjoy the last 3 beers looking at your low a$s car
http://****************.com/smile/emthup.gif
 
Re: Koni coilover installation instructions (vwpunk)

Quote, originally posted by vwpunk »
Image
Image
Image
Image
Image
Image

Well put. Best instructions I have ever read
Image

it really is that easy. i mean, if it takes more than 30-40 minutes, there is something wrong. sso that's like, what, 3 beers? yeah, i got it right. http://****************.com/smile/emthup.gif
 
Discussion starter · #5 ·
Re: Koni coilover installation instructions (mikemcnair)

Quote, originally posted by mikemcnair »
1. get air tools
2. get six pack of beer
Image

3. take off bolt on top of front struts (22 or 24mm)
4. take off 2 bottom bolts on front struts.(18mm or 19mm)
5. finish beer, open 2nd beer
Image
Image

6. replace all the stuff you just took off
7. take off top and bottom bolt on rear strut.
8. replace the shizzle you took off the back
9. drink your 3rd beer
Image
Image
Image

10. raise and lower the car a million times to adjust your coils
11. wash, lather, rinse
12. enjoy the last 3 beers looking at your low a$s car
http://****************.com/smile/emthup.gif

So you finish the first beer and then immediately open the second beer? Don't you need to throw away the first beer can or something before opening the second beer???? I am not getting it
Image
 
Re: Koni coilover installation instructions (a_riot)

Quote, originally posted by a_riot »

So you finish the first beer and then immediately open the second beer? Don't you need to throw away the first beer can or something before opening the second beer???? I am not getting it
Image

two words: double fistin' !!! http://****************.com/smile/emthup.gif
 
Re: Koni coilover installation instructions (mikemcnair)

im looking at getting some KWs would the installatioon be the same, accross the board regaurdless of manuf. ? just wondering if any brands are easier to install than others, id like some kw v2s
 
Re: Koni coilover installation instructions (DeathWobble)

Quote, originally posted by DeathWobble »
im looking at getting some KWs would the installatioon be the same, accross the board regaurdless of manuf. ? just wondering if any brands are easier to install than others, id like some kw v2s

all the same. http://****************.com/smile/emthup.gif see my post above
Image
Image
 
1 - 8 of 8 Posts