No matter what angle or what speed I go on some bumps, my Exhaust scrapes. Is there a way to fix this, it's starting to wear away the metal.
My Magna Flow exhaust allways scrapes, any tips?
hairy_armpits
1 - 5 of 5 Posts
Joined
·
48 Posts
No matter what angle or what speed I go on some bumps, my Exhaust scrapes. Is there a way to fix this, it's starting to wear away the metal.
Re: My Magna Flow exhaust allways scrapes, any tips? (hairy_armpits)
hopefully next week I'm having my tips cut and rewelded to fit a 4mo valence. I'm dropped ~1.8" and don't scrape much but it's enough to bug me. there are some on here who say that you can't reweld the magnaflow tips but it's been done before (search for Vortex ID Lugnut, he did this during the very first GB) and I plan on doing it again. http://****************.com/smile/emthup.gif
hopefully next week I'm having my tips cut and rewelded to fit a 4mo valence. I'm dropped ~1.8" and don't scrape much but it's enough to bug me. there are some on here who say that you can't reweld the magnaflow tips but it's been done before (search for Vortex ID Lugnut, he did this during the very first GB) and I plan on doing it again. http://****************.com/smile/emthup.gif
Re: My Magna Flow exhaust allways scrapes, any tips? (LostInSC)
![Image]()
![Image]()
I read all the posts too.. took it to a shop, and they did it for me no prob. Only things I would research before you go it that they do work in 2.5" piping and stainless. don't be scared by the posts... took my guys like 45 to do mine. btw I have a 60mm (2.4") drop too.
~A
[Modified by angill, 9:46 PM 6-3-2002]
I read all the posts too.. took it to a shop, and they did it for me no prob. Only things I would research before you go it that they do work in 2.5" piping and stainless. don't be scared by the posts... took my guys like 45 to do mine. btw I have a 60mm (2.4") drop too.
~A
[Modified by angill, 9:46 PM 6-3-2002]
Re: My Magna Flow exhaust allways scrapes, any tips? (gqjeff)
I had the same problem so I bought the 4-motion valence and had the tips modified to fit.
Before:
![Image]()
After:
![Image]()
Here is what they did:
![Image]()
Cut the original 2.5" piping and welded 2" modified piping in. Changed the tone of the exhaust slightly, but I felt it needed it anyway.
I had the same problem so I bought the 4-motion valence and had the tips modified to fit.
Before:
After:
Here is what they did:
Cut the original 2.5" piping and welded 2" modified piping in. Changed the tone of the exhaust slightly, but I felt it needed it anyway.
1 - 5 of 5 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
