VW Vortex - Volkswagen Forum banner
1 - 14 of 14 Posts

Bajamonkey77

· Registered
Joined
·
54 Posts
Discussion starter · #1 ·
Hey, I'm new here. I have a 1990 Golf GL. I recently took the engine out for a new header. After I got it all back together and running, the cooling fan is on once i turn the key on... That if my first question. My second question is I had to take my intake back off, while the engine was back in the car to replace my header gasket. After I put the intake back on, the car doesn't like to Idle. It misses, and varies from 500-2500RPMs. But off of an idle, it runs great. Is thire a simple fix to this?? I have checked vacuum hoses. I don't have any leaks, but i may have put them back on wrong? I allmost forgot, it is a Digifant II system i beleve.
 
Discussion starter · #4 ·
Re: 1990 Golf Questions (VegasJetta)

Well, I was going to change it in the car, but a stud decided it wasn't coming out easy. And broke off in the head. I took the whole engine out of the car. I don't know what the heater defrost mode is...
 
Re: 1990 Golf Questions (Bajamonkey77)

Quote, originally posted by Bajamonkey77 »
Well, I was going to change it in the car, but a stud decided it wasn't coming out easy. And broke off in the head. I took the whole engine out of the car. I don't know what the heater defrost mode is...

that sucks...the heater defrost 'mode' is all the way to the right on the hvac controls, underneith the stereo...
 
Re: 1990 Golf Questions (Bajamonkey77)

Quote, originally posted by Bajamonkey77 »
I have tried it off and on, no difference

hmm...maybe you have a bad switch on the rad. then...
 
1 - 14 of 14 Posts