I am thinking of getting an autopower rollcage for my GTI and searched but didnt find an actual picture with the cage installed. I want the 4 point so that i can run my harnesses on them. Thanks.
Rollcage rollcall: Need pics
teknoracing
41 - 59 of 59 Posts
Joined
·
4,445 Posts
I want something that doesnt hack up the interior. not sure if i can get that, possibly a rollbar?
Re: (StonedVW)
IIRC autopower sells bolt in half cages ( rear cages) and very little to no hackin up is required
| Quote, originally posted by StonedVW » |
| I want something that doesnt hack up the interior. not sure if i can get that, possibly a rollbar? |
Joined
·
9,755 Posts
Re: (fazeShift)
Its not custom, they make the crossbar (long wait time though!).
I have the weichers also with the single crossbar. They side bars are behind the seats so there is no fear of bonking your head
![Image]()
E
| Quote, originally posted by fazeShift » |
| fyi, leftcoastvw's cage was a six point weichers with "custom" cross bar... custom is in quotes because i'm not sure if it is custom ordered from weichers, or if it was custom fabbed just for leftcoast... |
Its not custom, they make the crossbar (long wait time though!).
I have the weichers also with the single crossbar. They side bars are behind the seats so there is no fear of bonking your head
E
Joined
·
2,102 Posts
Re: (Eric@SETuning.com)
The cage in the 337 is an Autopower one.
The cage in the 337 is an Autopower one.
Re: (Eric@SETuning.com)
i would consider 5'11" as "average"... hahaha... i'm 6'3" and my spikey hair normally touches the headliner regularly
![Image]()
![Image]()
in fact, i have to find a better helmet for track events because my old motorcycle dome cover is too big and forces me to stick my head in the sun roof slot...
![Image]()
yes, i'm a gangly basta*d
![Image]()
thanks for the update eric... i've been hawking the weichers setup for awhile, but have had higher priorities, like engagement rings and then brake swap plans holding me back from buying... maybe after summer i'll give safedrives or weichers a call... http://****************.com/smile/emthup.gif
trevis, your cage is still dope, though i think i would hit my head on the low bar... i love the goldfinger touch... i can't remember, though... did you guys weld yourselves? or did you end up in a shop with a gutted interior and a few days wait? either way... i'll be excited to see it this spring at one of the cali gtg's or shows
![Image]()
Modified by fazeShift at 6:43 PM 1-31-2007
i would consider 5'11" as "average"... hahaha... i'm 6'3" and my spikey hair normally touches the headliner regularly
thanks for the update eric... i've been hawking the weichers setup for awhile, but have had higher priorities, like engagement rings and then brake swap plans holding me back from buying... maybe after summer i'll give safedrives or weichers a call... http://****************.com/smile/emthup.gif
trevis, your cage is still dope, though i think i would hit my head on the low bar... i love the goldfinger touch... i can't remember, though... did you guys weld yourselves? or did you end up in a shop with a gutted interior and a few days wait? either way... i'll be excited to see it this spring at one of the cali gtg's or shows
Modified by fazeShift at 6:43 PM 1-31-2007
Joined
·
4,445 Posts
eRIC , LET SEE SOME INTERIOR SHOTS, CAN YOU KEEP YOUR STOCK INTERIOR?
Joined
·
4,337 Posts
Re: (StonedVW)
The only thing you usually have to modify is the rear door panels.
| Quote, originally posted by StonedVW » |
| eRIC , LET SEE SOME INTERIOR SHOTS, CAN YOU KEEP YOUR STOCK INTERIOR? |
The only thing you usually have to modify is the rear door panels.
Joined
·
9,755 Posts
Re: (RenegadeVW)
i have the seats in still, you have to cut into the rear cards. (not rocket science though
![Image]()
).
E
i have the seats in still, you have to cut into the rear cards. (not rocket science though
E
Re: (teknoracing)
funnny you say that......... if i hit you upside the head with a padded steel tube is it gonna hurt any less than if i were to remove the pad?
put THAT in your pipe and smoke it !
| Quote, originally posted by teknoracing » |
| But thick pads will be a must |
funnny you say that......... if i hit you upside the head with a padded steel tube is it gonna hurt any less than if i were to remove the pad?
put THAT in your pipe and smoke it !
Joined
·
2,080 Posts
Re: (mbg_euros)
Wait wait wait wait wait wait.... this is not my batman glass.
![Image]()
Thread necromancy ftw. http://****************.com/smile/emthup.gif
| Quote, originally posted by mbg_euros » |
| holy bump batman! |
Wait wait wait wait wait wait.... this is not my batman glass.
Thread necromancy ftw. http://****************.com/smile/emthup.gif
Re: (fazeShift)
http://www.autopowerindustries...t.asp
i had a gray autopower in my mk3 2.0 GTI and installed it myself. I didn't do any real effort to hide the mounting of it, drilled right through the carpet ect LOL but i did trim the rear panels and was able to to the back seats back in and I could still have passangers it was just kinda difficult for them to get in and out. I will be installing another one eventually in my Mk4 GTI maybe one with a crossbar this time for harnesses. http://****************.com/smile/emthup.gif
had this in my mk3 GTI
![Image]()
will probably go with something like this in my mk4 GTI, to have a place to mount harnesses
![Image]()
Modified by VR at 12:52 PM 3-24-2008
http://www.autopowerindustries...t.asp
i had a gray autopower in my mk3 2.0 GTI and installed it myself. I didn't do any real effort to hide the mounting of it, drilled right through the carpet ect LOL but i did trim the rear panels and was able to to the back seats back in and I could still have passangers it was just kinda difficult for them to get in and out. I will be installing another one eventually in my Mk4 GTI maybe one with a crossbar this time for harnesses. http://****************.com/smile/emthup.gif
had this in my mk3 GTI
will probably go with something like this in my mk4 GTI, to have a place to mount harnesses
Modified by VR at 12:52 PM 3-24-2008
Joined
·
1,161 Posts
Re: (TRBO337)
I was able to fit all stock pices back in my jetta when I put in the Autopower "race" half cage.
I was able to fit all stock pices back in my jetta when I put in the Autopower "race" half cage.
41 - 59 of 59 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
