VW Vortex - Volkswagen Forum banner
1 - 13 of 13 Posts

ERROL

· Registered
Joined
·
4,089 Posts
Discussion starter · #1 ·
if so, we NEEED your help. we have the newest c2 42# file and we just can't get the car to idle correct with this file. we can put the stock chip and injectors back in the car and will idle 100%..
so we need to borrow your ECU, or if you are uncomfortable with that, then let us run the new 42# file in your car to see if it will idle..
any help is greatly appreciated as we are at our wits end (hehe, i said "wits").
we're in huntington station NY 11746, and of course we will come to you if you are willing to help out.
thanks.
-errol-
you can also contact Vaporado. it's really his car.
 
Re: is anyone running obd2 42# vr6 software in the NY area? (ERROL)

I need to test someone elses ECU or someone can try my ECU with the new 42lb c2 software (12v obd2). I have tried just about everything else and im at a stuck point. Heres a link to my troubleshooting thread, so you can get an idea of where we are at.
http://forums.vwvortex.com/zerothread?id=3754604
TIA
-Walt
 
Re: is anyone running obd2 42# vr6 software in the NY area? (vaporado)

with c2 you have to make sure all your o2's are good, your MAF is good and plugged in ,your throttle body is good and that your intake system is working properly. c2 runs off the maf and if something is not right it will not read it properly.
chris the owner of c2 said this to my friend whom had the same idle issues with his software.
 
Re: is anyone running obd2 42# vr6 software in the NY area? (ramon.)

Quote, originally posted by ramon. »
with c2 you have to make sure all your o2's are good, your MAF is good and plugged in ,your throttle body is good and that your intake system is working properly. c2 runs off the maf and if something is not right it will not read it properly.
chris the owner of c2 said this to my friend whom had the same idle issues with his software.

Trust me we have gone over and checked and re-checked the MAF, injectors, chip, TB, o2's, cps, ecu, wiring....
 
1 - 13 of 13 Posts