i know some of the holsets are divided t3's but ...........i don't think you can put a holset hotside on something like a 35r
is ATP the only place to get a divided t3 housing?
50trim S
1 - 11 of 11 Posts
Re: is ATP the only place to get a divided t3 housing? (UntouchableGTI)
well instead of complaining just answer when i get my answer i won't bump them and they will disappear
| Quote, originally posted by UntouchableGTI » |
man you have a lot of threads, why dont you make 1 big thread and post all ur ?s there instead of so many threads.....jeez |
well instead of complaining just answer when i get my answer i won't bump them and they will disappear
Re: is ATP the only place to get a divided t3 housing? (UntouchableGTI)
but i follow the rules so thats not happening
maybe you should have asked more Q's like i do and you wouldn't have put a 400 shot on your motor and blew it up
![Image]()
i could understand your point if i was asking newbie questions but i don't do that
also found that BW makes a divided t3 that is .85 for there s258 and its good for over 600whp and the spool is as good or better than a 3076
basicly what i want is a divided 35r and then later on i may upgrade it to an HTA 3582 or hta 3586
Modified by 50trim S at 2:26 PM 10-19-2008
Modified by 50trim S at 2:28 PM 10-19-2008
| Quote, originally posted by UntouchableGTI » |
or you could get banned and then we wouldnt have to see any of ur threads |
but i follow the rules so thats not happening
maybe you should have asked more Q's like i do and you wouldn't have put a 400 shot on your motor and blew it up
i could understand your point if i was asking newbie questions but i don't do that
also found that BW makes a divided t3 that is .85 for there s258 and its good for over 600whp and the spool is as good or better than a 3076
basicly what i want is a divided 35r and then later on i may upgrade it to an HTA 3582 or hta 3586
Modified by 50trim S at 2:26 PM 10-19-2008
Modified by 50trim S at 2:28 PM 10-19-2008
Re: is ATP the only place to get a divided t3 housing? (50trim S)
http://himni-racing.com/index....=1186
If you are thinking about a twin scroll, spend some time on evolutionm.net. Lots of discussion and good info there
http://himni-racing.com/index....=1186
If you are thinking about a twin scroll, spend some time on evolutionm.net. Lots of discussion and good info there
Re: is ATP the only place to get a divided t3 housing? (cincyTT)
That is the ATP turbine housing.
| Quote, originally posted by cincyTT » |
| http://himni-racing.com/index....=1186 If you are thinking about a twin scroll, spend some time on evolutionm.net. Lots of discussion and good info there |
That is the ATP turbine housing.
Re: is ATP the only place to get a divided t3 housing? (cincyTT)
i have read a ton on that forum and theresults ive seen there is what has me interested in a twin scroll setup
that def. is the ATP divided housing and its way too small comparing it to an open housing the .78 divided would be about equal to like a .48 or a bit smaller open housing
and i damn sure wouldn't want a turbine housing that small on a gt35r
| Quote, originally posted by cincyTT » |
| http://himni-racing.com/index....=1186 If you are thinking about a twin scroll, spend some time on evolutionm.net. Lots of discussion and good info there |
i have read a ton on that forum and theresults ive seen there is what has me interested in a twin scroll setup
that def. is the ATP divided housing and its way too small comparing it to an open housing the .78 divided would be about equal to like a .48 or a bit smaller open housing
and i damn sure wouldn't want a turbine housing that small on a gt35r
Re: is ATP the only place to get a divided t3 housing? (50trim S)
some bullsey BW turbos have divided t3 turbine housings
does anyone know if one of these housing could be machined or somehow utilized with everything from the gt35r except the turbine housing
some bullsey BW turbos have divided t3 turbine housings
does anyone know if one of these housing could be machined or somehow utilized with everything from the gt35r except the turbine housing
Joined
·
4,413 Posts
Re: is ATP the only place to get a divided t3 housing? (50trim S)
Theres no point. Why are you trying to do this?
| Quote, originally posted by 50trim S » |
| some bullsey BW turbos have divided t3 turbine housings does anyone know if one of these housing could be machined or somehow utilized with everything from the gt35r except the turbine housing |
Theres no point. Why are you trying to do this?
Joined
·
4,413 Posts
Re: is ATP the only place to get a divided t3 housing? (IzVW)
![Image]()
| Quote, originally posted by IzVW » |
Because this is the Never Ending Build(tm). 
|
1 - 11 of 11 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
