VW Vortex - Volkswagen Forum banner
1 - 19 of 19 Posts

Sputterputz

· Registered
Joined
·
2,272 Posts
Discussion starter · #1 · (Edited)
I have for sale, a freshly rebuilt and ported/polished SR3 from Jbetz or mr bbm, He traded it to me for one of my 2087 chargers that I did not need..

Well After it took me over a year to get my machinist to make me a set of plates for the intake and exhaust (which are included). He seems to have fallen asleep at the cad computer again. I have thought about moving onto another power source for the original project. If it sells great, I will go in another direction, if not.. well so be it.. it will keep holding down the shelf it sits on..

This one is completely polished on the outside and has a "stage 2 porting/polishing" on the internals of the charger itself. I will see if I can get John to say "hey it is so" in here if he is not to busy..

Anyway. for sale 1500 OBO..

http://www.ebay.com/itm/140765059613?_trksid=p5197.c0.m619
 
Save
Discussion starter · #4 ·
a technicality, autorotor is a company that bought a series of chargers from OPCON, lysholm did the same, they are essentially the same, autorotors chargers were generally all polished on the outside, and had slightly more rounded edges on the case..

This one in particular is larger in displacement than the 2087 (used for the g60 replacements from bbm) .87 vs 1.33 so there is alot more potential in this size charger.
 
Save
Discussion starter · #11 ·
seriously its a polished shoebox... i will get some, pm me your email or pn number where you want them sent.
 
Save
will this bolt on to a pg block with necessary materials just as a regular lysholm would? thanks for any information
 
Save
1 - 19 of 19 Posts
You have insufficient privileges to reply here.