If you have a TT and get the code Lateral Acceleration sensor here is what you need to do.
A. verify that is your code and the sensor is (g200)
B. Erase code and Make sure it comes back.
C. Remove the dash under cover drivers side. Locate the sensor its the first one on the bracket located on the key side on the steering column. Its clipped in you just have to put a small blade screw driver under the yellowish colored metal clip and it pop up. The sensor in front of that is called the longitudinal sensor (g202). People seem to be confused
D. Now you need Vag Com. You need to go to brakes 03 address number and then go to login 11 and enter 40168. once you do that you go to basic settings 04 and type in 063 this is the zeroing process for this sensor.
once it says adjustment in block 1 is ok back out and check faults erase any faults if any and recheck.
This should fix you guys up. Thanks.
A. verify that is your code and the sensor is (g200)
B. Erase code and Make sure it comes back.
C. Remove the dash under cover drivers side. Locate the sensor its the first one on the bracket located on the key side on the steering column. Its clipped in you just have to put a small blade screw driver under the yellowish colored metal clip and it pop up. The sensor in front of that is called the longitudinal sensor (g202). People seem to be confused
D. Now you need Vag Com. You need to go to brakes 03 address number and then go to login 11 and enter 40168. once you do that you go to basic settings 04 and type in 063 this is the zeroing process for this sensor.
once it says adjustment in block 1 is ok back out and check faults erase any faults if any and recheck.
This should fix you guys up. Thanks.
