VW Vortex - Volkswagen Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 27 Results
  1. Golf R (VII) Parts
    Selling the Integrated Engineering FDS Intercooler with the upgraded intercooler charge pipes I had on my Mk7.5. One of the holding tabs for the condenser is broken off, but it doesn't affect how it holds in place, as I had it installed like that without issue. Location: Orange County, NY Open...
    $800 USD
  2. 2.5l Inline-5 Engine Forum
    Figured I’d post this, just somewhat completed a 2.5 engine swap the good ole 2.0T skipped time and bent all the intake valves. Upon doing a bit of research I discovered the 2.5, far more reliable and with some Integrated engineering goodies and an exhaust header, it makes more power NA than a...
  3. Golf VI R
    I am putting my '13 Mk6 R back to stock for smog reasons. I am bummed but that's what I get for choosing to live in CA. I have the following parts that came off the car available for sale if anyone is interested. [SOLD] — APR Downpipe w/ Cat fits 12-13 R, 09-13 A3 Quattro [SOLD] — IE Cold Air...
  4. Golf/GTI VI
    So i’m thinking about switching to stage 2 from integrated engineering from my current apr stage 2, I have full apr exhaust system and apr carbon fiber intake, i was wondering how hard it would be to switch tunes, i don’t know if the ecu is an apr ecu bc i bought the car tuned, was also seeing...
  5. South East Parts
    I have a like new cold air intake with Carbon Fiber lid from Integrated Engineering that fits MK7 / MK7.5 GTIs and Golf Rs. All hardware is included. Local pick up only. I DO NOT SHIP.
    $475 USD
  6. Golf V/Jetta V Parts
    Superb condition IE front camber plates. These are adjustable up to -3 degrees of camber according to IE, which is the most of any camber plates that I have come across. These are what you need to dial out your understeer as much as possible to gain traction and put the power down in the...
    $420 USD
  7. Jetta VI Parts
    Superb condition IE front camber plates. These are adjustable up to -3 degrees of camber according to IE, which is the most of any camber plates that I have come across. These are what you need to dial out your understeer as much as possible to gain traction and put the power down in the...
    $420 USD
  8. Golf/GTI VI Parts
    Superb condition IE front camber plates. These are adjustable up to -3 degrees of camber according to IE, which is the most of any camber plates that I have come across. These are what you need to dial out your understeer as much as possible to gain traction and put the power down in the...
    $420 USD
  9. Golf R (VI) Parts
    Superb condition IE front camber plates. These are adjustable up to -3 degrees of camber according to IE, which is the most of any camber plates that I have come across. These are what you need to dial out your understeer as much as possible to gain traction and put the power down in the...
    $420 USD
  10. Golf/GTI VII Parts
    This is an Injen SP short ram cold air intake system, black in color, model # SP3078BLK. It comes with all parts including the heat shield with all 3 rubber o-ring mounts, mounting grommet bolt/screw that threads into the side of the valve cover, hose clamps, freshly cleaned & oiled air filter...
    $130 USD
  11. Jetta VII Parts
    Located at Scott AFB IL (62225), however if you live between there and Michigan or there and Texas I may be able to arrange personal drop-off as I'll be between those two locations soon. If you want them shipped, you will have to pay shipping cost. These will be taken off the car in about...
    $0 USD
  12. Golf V & Jetta V
    I just picked up an apr hpfp for my mk5 gti 2.0t fsi, and was wondering if i will have any motor problems after installing it, only having an IE stage 2 tune flashed on the car. Im currently on k03 turbo.
  13. Jetta VI Parts
    Integrated Engineering Adjustable Camber Plates (pair). New in original packaging. Never installed. Updated version anodized black. IE's product page still shows the original red ones. (Confirmation from IE sales: Same as the red version. Simple change to match the rest of their product color...
    $400 USD
  14. Golf R (VI) Parts
    Integrated Engineering Adjustable Camber Plates (pair). New in original packaging. Never installed. Updated version anodized black. IE's product page still shows the original red ones. (Confirmation from IE sales: Same as the red version. Simple change to match the rest of their product color...
    $400 USD
  15. Golf/GTI VI Parts
    Integrated Engineering Adjustable Camber Plates (pair). New in original packaging. Never installed. Updated version anodized black. IE's product page still shows the original red ones. (Confirmation from IE sales: Same as the red version. Simple change to match the rest of their product color...
    $400 USD
  16. Golf/GTI VI
    My car has a CTS K04 (not K04X) and it is running Integrated Engineering's K04 95 Ron tune. I am a bit concerned about the AFR, my car is running 12.5 to 12.7 ish AFR under boost, is it safe? or is it running too lean? Thanks
  17. Golf/GTI VII
    I just wanted to get every body's idea on their tuner. I've been trying to watch videos on YouTube and do some research on the fastest tune for the mk7 GTIs. I was apr stage 2 and I was quite happy with it. But I totaled my 2015 mk7 GTI and I missed it so much I got a 2016 GTI. Since I have to...
  18. Golf IV/Jetta IV Parts
    Brand new mk4 1.8t integrated engineering catch can set up . Box has only been open, only selling because going with a custom set up now Asking 275.00 plus shipping
  19. Forced Induction Classifieds
    I have brand new IECVA2 camshafts that have 0 miles on them, installed for testing and removed. These are the street/strip pair that make +60 hp over stock cams I think Integrated Engineering wont be making another batch and I got some of the last ones, so don't sleep on snatching them up...
  20. CC
    I have a brand new, unopened set of IE valve springs and retainers that will fit any ea888 or ea113 engine. I bought them for my 2016 CC but I ended up getting rid of it before I had the chance to install. Anybody building a 2.0tsi, or looking to prevent future valve float issues please feel...
1-20 of 27 Results
Top