VW Vortex - Volkswagen Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 44 Results
  1. General Audi Classifieds
    Selling used Ross Tech Hex-CAN USB cable. This is the older version that supports unlimited VINs Excellent condition, as good as brand new. More information here: https://www.ross-tech.com/vag-com/old-interfaces/huc.php $360 shipped in US
    $375 USD
  2. VAG-COM Diagnostic Forum
    Hi all, i recently fitted a genuine vw highline reverse camera and coded it into my car, however 2 problems i have are that i dont have the lines that bend with turning the steering wheel in the camera view, (my car came from factory with front and rear sensors, with the lines front and back...
  3. Golf/GTI VII
    Hi all, first post here so apologies if its in the wrong sector, recently fitted a genuine vw highline reverse camera and coded it into my car, however 2 problems i have are that i dont have the lines that bend with turning the steering wheel in the camera view, (my car came from factory with...
  4. VAG-COM Diagnostic Forum
    So here lies the problem. I am the proud owner of a 2006 1.4 golf fsi I had the abs light and esp light come on so I had the abs pump changed. The garage I took it to changed the abs pump and told me it needs to be coded which they do not do. I ran a scan and have the following error code. I...
  5. Jetta VII
    Hey I'm trying to get this adaptation on my 2020 GLI but haven't gotten confirmation that this works on my model year. I thought this would be the adaptation to allow the "Audi Style" tails to turn off the squares until the brake pedal is pushed in like in this image []: Central electronics >...
  6. Golf V/Jetta V Parts
    Hello, I am selling my Ross-Tech HEX-CAN VCDS Cable. This has a USB for easily connecting to your laptop. I'm selling because I no longer need it. $450 shipped to lower 48. I'll take Venmo or Cashapp. Thanks
  7. VAG-COM Diagnostic Forum
    Hello, Car was running fine then it just died. Won't restart. I took off the timing belt inspection cover and it's not broken so I figured it jumped a tooth or more. But looking at the scan the mileage and date doesn't line up. The mileage for the error is more than what's on the car and the...
  8. VAG-COM Diagnostic Forum
    I'm trying the AC Compressor First Run-In process, and I don't know what these prerequisites mean Basic setting was performed for the flaps Inside blower motor is switched on Load management not active Can anyone help?
  9. VAG-COM Diagnostic Forum
    My compressor is not working, and in module 08 I have the error "AC Compressor First Run-In ". I tried following this tutorial below to fix it, but I got the error "conditions not correct". http://wiki.ross-tech.com/wiki/index.php/VW_Golf_(5K)_Climatronic In the prerequisites, I don't know what...
  10. VAG-COM Diagnostic Forum
    Does anyone know the step by step to turn on the alarm led light when any door is open?
  11. Golf V & Jetta V - Vendor Marketplace
    Like-new. Asking $250.00
  12. Phaeton
    Hey, Hoping for help resolving a DPF issue on my BMK 2007 Phaeton. A VCDS scan returns code P242F from the Engine Module. When I watch VCDS Message blocks 100 -102 I am getting a zero reading from MVB 102.4 whereas on every DPF example I read online states that 102.4 should return a pressure...
  13. Golf/GTI VII
    Hi. I have a Golf MK7 2013 Europe version. The car has folding mirror. When i lock the car the mirror will fold. When i unlock the car the mirror will not unfold, i must start the engine for that. Does anyone know if it's possible to modify with VCDS this option, so when i unlock car from key...
  14. VAG-COM Diagnostic Forum
    I have a 2013 Golf R that has recently started no starting. I'll turn the key, hear the fuel pump prime, then nothing (no tick, or turnover, etc.). All climate control, lights, dash, and electric power steering work fine. When this happens it also pops up an "ESC stabilization error" message on...
  15. VAG-COM Diagnostic Forum
    Hello, I´m newbie in the VCDS world. I´m from Brazil and I do not have much resources to do this code. 1- Is there someone that could help me to calculate a longcode of a Golf MK7? 2- What is the information about the car do we need to calculate this? Thank you all.
  16. Golf/GTI VII
    Okay, its -40 right now and I have no time to replace my mk7 manifold, which hasn't responded to a new imrc sensor and the vacuum lines all look fine. I'm pretty sure I can code the imrc out of the ecu through Vagcom? Also curious if thats possible to do with obd11? eventually in the summer id...
  17. VAG-COM Diagnostic Forum
    Hi. I have a vcds 812.4 cable and it now says port ok interface not found. Is there a way to fix it? There was a process of reflashing it but I cant find it anymoee. Thanks
  18. A4, S4, A5, S5, RS4, RS5, Q5, SQ5, (B8)
    Yup I screwed up. I promise I will never mess with the green menu again!!! I have some options in the MMI (TPMS reset, wiper service position, etc) that are no longer accesible since messing with the green menu. Forgot what i did and didnt write down what I did. Is there a way to reset ECM's...
  19. Golf IV & Jetta IV
    if anyone has VCDS near elkheart would you be willing to scan my car small fees is ok as im not able to afford the tool myself right now and hitting a dead end with my GLI 1.8t Code P2138 changed cam pos. sensor changed the N75 ordered a new hella pedal assmbly
  20. Golf IV & Jetta IV
    Hi, everyone Does anybody knows if after a replacement of the battery on a mk4 1.8T 2003, a software intervention is required, obligatory using a VCDS(VAG COM) ? Or you can just simply put a new battery without worries ? In addition I can say that the battery that I want to install has better...
1-20 of 44 Results
Top