VW Vortex - Volkswagen Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 407 Results
  1. Corrado Parts
    I have a 91 corrado g60 that’s pretty clean exterior, complete engine -automatic -no seats -gray dot door cards -Read dot rear seat -complete engine bay -borbet wheels -Non abs brakes 93 corrado vr6 slc Car was stripped apart and is in boxs A lot of broken plastics 5 clean speedline wheels B&G...
    $9,999 USD
  2. For Sale BBS RK 504

    5x100 Classifieds
    A set of bbs rk 504 split rims 17 x7. 5 et 35 bought them unfinished and was planning on doing so. have since loss interest in doing them so would like to sell them for what I paid or close to what I paid.
    $550 USD
  3. 3.6l 24v VR6 Forum
    I am a first year engineer and I want to build my own (verry bad) race car. I could not find the distance between mounting holes and i wonder if anyone has any dimensions of that. I will build my car around the engine so this is my first set in building a (****ty) race car I know that this is a...
  4. 2.8l 24v VR6 Engine Forum
    Was changing filters on my 02 gli 6 speed. And and im just wondering what this is ? What's the purpose it serves ? Curious is all thanks.
  5. Golf IV & Jetta IV
    2002 VW 2.8 L, 24 valve, VR6 engine. Please help me to solve my oil light and alarm going off despite having sufficient (maybe too high?) oil pressure. While driving my 2002 VW Eurovan based Winnebago RV on the highway the red oil can dummy light with 3 beep audible alarm started up...
  6. 3.2l 24v VR6 Forum
    Hello, im diagnosing my TT mk2 vr6 during long time and i got a tech questions. When the key is turned to the ignition position (engine not started), how should the throttle position and its value behave? Steady or maybe fluctuate? (I've noticed that sometimes this value fluctuates and when I...
  7. VR6 Jetta Wagon

    2001 Jetta VR6 GLX Wagon 72k original miles Clean Title and Carfax New tires and battery $5600
  8. Golf IV & Jetta IV
    Central Florida. Really just throwing This out there. shes got 110k mi. Head gasket replaced at 100k. Stage ii southbend clutch. Aem cai. oem lower suspension replaced. Water pump. Oil filter housing, aluminum crack pipe. New Tstat and related parts. Coolant ball. Various hoses. Radiator...
  9. 3.2l 24v VR6 Forum
    Hi All, I'm new here to the VW family, just had a little issue I wanted to get some thoughts and opionions about. I had very slight timing chain sound appear, seems to be only in lower revs, so i thought its the uper tensioner could be the culprit, although when i replaced it i did not hear...
  10. Golf IV & Jetta IV
    I’m looking to buy a mk4 jetta vr6 with 200,000 miles on it, is it worth it? The car looks like its in good shape for 200,000. Would it be worth it to daily drive a vr6 that’s already at 200,000 miles? Anyone with experience of owning one in the higher mileage range give me your 2 cents. thanks
  11. Passat (B7)
    Hello, I am looking to swap in an engine into my 2013 Passat 3.6L. I can't find any 3.6L CDVB that are lower mileage on the west coast, so I am thinking of swapping a 3.6l CNNA into it instead. Does anyone know if I can swap a CNNA engine id (they came in similar year CC's) for my CDVB engine...
  12. Golf II & Jetta II
    Hello, I'm planning on doing a vr6 turbo mk2 sometime this year. I'm wondering which route I should take, i was thinking of doing a 3.2 vr6 build but I assume that will be the most expensive. Does anyone know the cost of each route (12v, 2.8 24v, 3.2 24v, 3.6 24v)?
  13. 3.6l 24v VR6 Forum
    Hey All, I have a 2008 VR6 Passat 4Motion automatic sedan with ~145k on it. Within the last few days I've been having issues stalling at idle once everything is up to temp. First noticed at a stoplight and then later in a drive thru - I have been able to replicate the problem. It begins with a...
  14. Corrado Parts
    Sold Comes as pictured in New Old Stock condition.
    $0 USD
  15. Golf IV & Jetta IV
    Hey all, been having issues with my 2000 12V VR6 recently. Can’t seem to catch a break. So a few weeks ago under hard acceleration I could feel a slight miss but it was only occasionally. Then one day it became a miss with a flashing cel. Scanned and got a Cyl 3 code. I replaced the wire with a...
  16. Golf III & Jetta III
    Hello everyone, This is my first post on this site so don't go to hard on me.... My dad and i share a passion for VW, a couple months ago after coming back from studying in south america my dad handed me the keys to his MK3 VR6 GLX Jetta... like all project cars, you fix something and another...
  17. Golf IV & Jetta IV
    Hello, I have a 2001 12 Valve VR6 I recently had my block machined and cleaned up at a shop. NOT overbored or anything, just crosshatched and decked. I just measured my piston ring gap in my cylinders and the gap is WAY out of spec. The Bentley manual says 0.20-0.40 mm for top 2 compression...
  18. TT, TTS & TTRS (Mk2, a5 chassis)
    I’m looking at building up the 3.2 engine but I’m not sure I want to go the F/I route. If I were to keep N/A and go with things like overbore and high compression…would that even be worth the build? Is 11.5:1 something I can run on 93/94 octane pump gas? Yell at me about anything lol, I’m just...
  19. CC
    I really don't know how to word this post. I'm not good with that kind of thing. I have a 2012 CC Sport. It's a 6 speed. It has the TSI 2.0. It's on its last leg. The head gasket is going and it's about to blow up. It was smoking the past few days. At this point, it's my only vehicle and I have...
  20. Golf III & Jetta III
    The power steering rack on my '97 mk3 vr6 Jetta blew out the seals on the passenger side (ZF rack). So I went ahead and installed a "new" refurbished one into the car. Bled the system and turned the wheels from lock to lock while the car was up in the air. Went out for a drive. Everything felt...
1-20 of 407 Results
Top