VW Vortex - Volkswagen Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Golf IV & Jetta IV
    Ok so I’m doing the vvt solenoid and before taking it out I marked the chain with the arrows on the cam caps but didn’t mark where the exhaust cam was positioned. A video I watched said that the notches on the intake and exhaust are supposed to be pointed the same direction, is that so? If not...
  2. Golf VII R
    I have a 2019 Golf R. I had several cam position codes- p0011 (over advanced) I think p000a (slow response) and p0012 (over retarded), and also the code for cold start intake cam over advanced. I took it to the dealer and they replaced the cam adjustment valve and magnet. The codes went away...
  3. 1.8T Engine Forum
    I’ve been looking around for a couple days now but can’t find anything solid on wether or not I can remove the vvt solenoid from the cam tensioner to clean it. I can’t seem to find if it’s able to be properly removed and I don’t see anywhere you can buy the solenoid from unless it’s with the...
  4. The Volkswagen Lounge
    If I get this code with a detailed description of circuit open or ground to B+, is the solenoid in normal or overlap??? Assuming it is shorting any help would be greatly appreciated
1-4 of 4 Results
Top