1.8->2.0 tuning???

596 Views 3 Replies 4 Participants Last post by rockin16v, Feb 13, 2002

VWFREQ

Discussion Starter · Feb 13, 2002

whats up guys.
couple months ago i slamdunked a 2.0 16V into my 89 GTI 16v.
I retained the inj and ign from the 1.8.
I did no tuning during this swap just plugged in the injectors and dist and started her.
She runs good but i think theres some hidden power in her.
Heres the specs
2.0 16V
Kent cams 268 set
k&n filt
blue ignitor wires
f6dtc plugs.
what can i do to my timing and fuel etc. to maximize power?
also should i build/buy the enrichment module?( i think i know this answer)
thanks!!!!!!
-cat

Save

1 - 1 of 4 Posts

tmessenger

· #3 · Feb 13, 2002

Re: 1.8->2.0 tuning??? (VWFREQ)

Set down the current to the DPR to about 3-4 milliamps, this will help the midrange,
but the reality is cis-e was too lean even with a stock 1.8L engine at the top end. The cheap fix is euro cis.

Save

1 - 1 of 4 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month