[fleesR32]

after 4 weeks now fumbleing around trying to fix a nasty miss. i replaced the coil, wires, plugs, car/rotor. compression avg 170 lbs.
it barely idles and drives very bad.
today i gave up and took off the intake and there is alot of oil in the runners.

also looks like a litle oil/water mix kinda milky, but may be from the sea foam i forced down the injectors. i guess i'll do a leak down test then pull the head. i just put on a brand new muffler too. just a cheapo dynomax but sounds good, it took a very long time to burn in. kindaweird?

advice welcome


Modified by fleesR32 at 6:29 PM 11-25-2006

 

[fleesR32]

bee ump

 

[fleesR32]

milky substance in the lower intake only, dipstick looks normal so does valve train under oil cap. whats weird is it happened all at once. like throwing a switch. power loss, won't idle, etc. going to do a leak test today. comp is normal. its gotta come from two places: down the guides around valves, or blowby bad rings. which very odd that all rings go at once.
ur sig says 2.9l. funny my ecm art# says its a 2.9 as well.