Joined
·
8,171 Posts
Re: 2.1liter 9:1 forged pistons (remuz2fly4u)
When I get JE pistons I give them this:
crank center to deck - 220mm (236mm ABA)
pin diameter 20mm 16V 21mm ABA
stroke 86.4mm 1.8, 92.8mm 2.0
chamber size all 16V 45cc
gasket area 1cc
desired compression ratio
If it is bigger than a 83.5 bore I get them to chamfer the top edge to insure the gasket and the piston don't meet.
When I get JE pistons I give them this:
crank center to deck - 220mm (236mm ABA)
pin diameter 20mm 16V 21mm ABA
stroke 86.4mm 1.8, 92.8mm 2.0
chamber size all 16V 45cc
gasket area 1cc
desired compression ratio
If it is bigger than a 83.5 bore I get them to chamfer the top edge to insure the gasket and the piston don't meet.
