7x13 on a rabbit what offset
1 - 20 of 23 Posts
Re: 7x13 on a rabbit what offset (brinskan)
ET25 will work but you need to run spacers in front (13X7 ET25 will rub the strut at the lower bolt flange), ET20 will work but you might need to mod the fenders depending on the tires.
This is with ET25 (7mm spacers in front) and 215/50-13 Yoko A023R rubber, required fender work but the added front track works great!
![]()
ET25 will work but you need to run spacers in front (13X7 ET25 will rub the strut at the lower bolt flange), ET20 will work but you might need to mod the fenders depending on the tires.
This is with ET25 (7mm spacers in front) and 215/50-13 Yoko A023R rubber, required fender work but the added front track works great!
Joined
·
1,068 Posts
Re: 7x13 on a rabbit what offset (bahnblitz)
7x13...with 215/50/13...Yoko 32R's......
![]()
![]()
7x13...with 215/50/13...Yoko 32R's......
Re: 7x13 on a rabbit what offset (Chapel)
quote:[HR][/HR]I have 13x6s from a BMW 2002...
they arent ET0...
they are ET25[HR][/HR]
Yes but not 13X7...and I bet they are older, Panasport used to make lots of fitments for 4X100 but not in the last ten years or so. That's why I went Compomotive, at least they would custom machine any offset I asked for!they arent ET0...
they are ET25[HR][/HR]
Re: 7x13 on a rabbit what offset (millerwj)
I believe that the '02s are 4x100, but honestly I'm not sure. I happen to have a set of Panasport 13x5.5" or 13x6" (ca. 1975) in storage. They just need to be bead-blasted and clear-coated. Might look good on my cabby (or another Vortexers?).
I believe that the '02s are 4x100, but honestly I'm not sure. I happen to have a set of Panasport 13x5.5" or 13x6" (ca. 1975) in storage. They just need to be bead-blasted and clear-coated. Might look good on my cabby (or another Vortexers?).
Re: 7x13 on a rabbit what offset (pmburn01)
02's are indeed 4x100. stock offset is about +17 or 18mm for the 14x6. The 13x5.5 stock steel wheels are 25mm offset. The wider they get the further out they gotta go to clear the springs.
Durell, are you using spacers with those 13x7's?
02's are indeed 4x100. stock offset is about +17 or 18mm for the 14x6. The 13x5.5 stock steel wheels are 25mm offset. The wider they get the further out they gotta go to clear the springs.
Durell, are you using spacers with those 13x7's?
Re: 7x13 on a rabbit what offset (bahnblitz)
as for tire size... 175/50/13 yeah im stretching them...
quote:[HR][/HR]damn more competition for my rabbit! Hows the project coming Brian?[HR][/HR]
it started has a winter beater, now its getting more loving...as for tire size... 175/50/13 yeah im stretching them...
Joined
·
637 Posts
Re: 7x13 on a rabbit what offset (brinskan)
where can i get some cheap autocross tires and wheels?
where can i get some cheap autocross tires and wheels?
Joined
·
1,068 Posts
Re: 7x13 on a rabbit what offset (A1Rocco)
quote:[HR][/HR]Durell, are you using spacers with those 13x7's?[HR][/HR]
.........nope, no spacers....when i had them made i measured the offset on the stock steel vw wheel.....
Re: 7x13 on a rabbit what offset (DURELL)
http://aeroracewheel.com/Products/31Series.html
so... say I want these.
is offset and backspacing similar?
what would I need to tell them?
http://aeroracewheel.com/Products/31Series.html
so... say I want these.
is offset and backspacing similar?
what would I need to tell them?
Joined
·
1,068 Posts
Re: 7x13 on a rabbit what offset (Chapel)
chapel~ i think mines were 4 inches and then some ........so i dont think those measurements would fit, without a spacer.........i'll take a run out to my wheels and measure them....there in the basement......
chapel~ i think mines were 4 inches and then some ........so i dont think those measurements would fit, without a spacer.........i'll take a run out to my wheels and measure them....there in the basement......
Joined
·
1,068 Posts
Re: 7x13 on a rabbit what offset (DURELL)
in american, my wheel offset was.......4-7/8 inches
![]()
in american, my wheel offset was.......4-7/8 inches
1 - 20 of 23 Posts
