bump
89 Jetta digi 2 - no start
I'm working on my neighbor's mk2 Jetta, 89, digifant 2. Car won't start, it's not getting any fuel to the cylinders.
It's getting spark, fuel pressure is good. The timing is good.
It looks like the injectors are not opening. I checked the plug that goes to the injectors and it's getting voltage when it primes and while cranking. I'm gonna check the injectors one by one tomorrow with an LED test light but what else can it be? I'm stumped. I tried swapping another ECU I had laying around and it didn't make any difference.
It's getting spark, fuel pressure is good. The timing is good.
It looks like the injectors are not opening. I checked the plug that goes to the injectors and it's getting voltage when it primes and while cranking. I'm gonna check the injectors one by one tomorrow with an LED test light but what else can it be? I'm stumped. I tried swapping another ECU I had laying around and it didn't make any difference.
1 - 3 of 3 Posts
It was the ECU relay
1 - 3 of 3 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
VW Vortex - Volkswagen Forum
A forum community dedicated to all Volkswagen owners and enthusiasts. Come join the discussion about performance, builds, modifications, classifieds, troubleshooting, maintenance, new releases, and more!
Full Forum Listing
Explore Our Forums
Recommended Communities
