VW Vortex - Volkswagen Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2,636 Posts
Discussion Starter #1
has anyone else had a problem with the MIL light coming on for the secondary air injection system
error is incorrect flow detected int
I need to find out what I can do to fix this problem...
 

·
Registered
Joined
·
2,820 Posts
Re: A Question for VR6 Owners (v b chil-n)

OK...here you go.... I have the same problem.... the secondary air injection system only runs when it is cold outside... i can't remember how cold, anyway not a drivablilbity problem because after the car warms up it no longer runs... there are a few things you can check..
1. all the vaccum lines, check and or replace all of them (replace just to be sure.)
2. replace the pump (ouch...this is expensive.. you have to take off the intake manifold to get to it.)
if you don't know where it is let me know and i will e-mail you a pic with arrows.... [email protected]
 

·
Registered
Joined
·
2,636 Posts
Discussion Starter #3
Re: A Question for VR6 Owners (passat_guy21)

OH I know were it is It was replaced along with the vaccume servo and some other little switch in front of the manifold and I stoill have the same problem
I did not check the vaccume lines though because they run into spots I can't see
do you have a good way to check those
 
1 - 3 of 3 Posts
Top