VW Vortex - Volkswagen Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
1,312 Posts
Discussion Starter · #1 ·
When a 35r .82 a/r start to spool and when it would hit 20psi+. On a aba 2.0 20v? I've been trying to find some dynos or someone with a similar set up, but have been **** out of luck.
 

· Registered
Joined
·
1,620 Posts
Re: Anyone know... (Sam6)

my buddy brice here on vortex, i believe his user name is 1991-20v
ran a 2871 .63 a/r on a stock 1.8t which hit 19 lbs by like XXXX rpm ( i believe it was like 3700, youll have to pm him to get exact details)
anyway, when he switched to a .82 a/r to see if itd be more advantageous, he only gained 12whp and it took 1000 more rpm to fully spool.
although your 2.0 will flow a little more than a stock 1.8 aeb, i wouldnt call it a very streetable setup on an even bigger turbo, with a big a/r
id venture to guess 20psi spool would be after 5000rpm, just an assumption however
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top