[WMTJ]

Can anyone post pics of their setups. I'd like to se how you have them routed back into the intake.

 

[[email protected]]

Re: ATP turbo VR6 with a crank case breather. (WMTJ)

i took the whole heater assembly and all that shnazz off, and just put a cheap breather filter on the end of the breather nipple off the valve cover

 

[CorradoFANATIC]

Re: ATP turbo VR6 with a crank case breather. (Anand20v)

what about the idle stabilizer for obd1 vr6t's?

 

[garyw]

Re: ATP turbo VR6 with a crank case breather. (CorradoFANATIC)

on my VR6, there is a sensor connecting to the crankcase breather hose, what's the sensor for?

 

[WMTJ]

Re: ATP turbo VR6 with a crank case breather. (garyw)

I'm getting some extra pressure built up in the system (oil out of the tail pipe) so I'd like to create some vacume to releive it. Being a turbo doesn't help the situation either.

 

[mattstacks]

Re: ATP turbo VR6 with a crank case breather. (garyw)

Its a heater, for the fumes I belive. Not really needed.
There have been many posts regarding catch cans and air filter filters.

 

[[email protected]]

Re: ATP turbo VR6 with a crank case breather. (CorradoFANATIC)

Quote, originally posted by CorradoFANATIC »

what about the idle stabilizer for obd1 vr6t's?

i put a nipple on the bend rihgt before the TB and connected it, just like tha factory pipe