VW Vortex - Volkswagen Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
256 Posts
Discussion Starter · #1 ·
If anyone knows will a stock front sway bar from a Audi TT front trak/Quattro or R32 work on a 03 GLI with the correct end links already have KW V2 so it has the end link mount on the strut I want this setup so the sway bar goes under the axle bc my car rubs the front driver axle only have maybe 1/4" clearance right know I work for Audi so parts are cheap anyone?
 

·
Registered
Joined
·
6,550 Posts
Re: Audi TT/R32 stock sway bar on MKIV (eurospecdubber)

Yes, it can be done and has been done. If you have the needed attachment point on your struts already, you will need the right bushings and the link from the strut to anti-roll bar.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top