Auto Meter Boost gauge and Air/fuel install questions

897 Views 2 Replies 2 Participants Last post by corradokid004, Nov 23, 2001

corradokid004

Discussion Starter · Nov 22, 2001

has anyone install these gauges in a 90 corrado g60?
What i need to know is.... Should i drill and tap a new hole in the intake manifold (superchanged) and if so where is the best place, or do i remove one of the 2 lines in the back of the manifold? (one goes to the carbon canister control valve and one i believe goes to the ecu.
and for the Air/Fuel ratio gauge i need to know which wire i need to splice into on my 02 sensor (heated 4 wires)

thanx

See less See more

Save

1 - 3 of 3 Posts

Tommy D

· #2 · Nov 23, 2001

Re: Auto Meter Boost gauge and Air/fuel install questions (corradokid004)

no need to drill and tap the manifold. I got my vac. source from the line that goes to the air box,that opens the hot air flap. and as for the a/f gauge the wire you want to hook up is purple just like the one on the gauge.

Save

corradokid004

Discussion Starter · #3 · Nov 23, 2001

Re: Auto Meter Boost gauge and Air/fuel install questions (Tommy D)

alright.... that helps quite a bit! it looks like i know what im doing tomorrow
thanx alot

Save

1 - 3 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month