[Ralph @ Autotech]

I know it's been an awfully long time and much longer than we originally anticipated

, but we finally have finished the lightweight 16V intermediate shaft pulleys and they are now in stock!

They are manufactured from 6061-T6 aluminum and weigh just under 7 ounces. The 5-spoke design is a perfect complement to our lightweight adjustable cam timing gear (part number 10.109.402K) which can be seen at http://www.autotech.com . Our Autotech logo is CNC laser-engraved.

Based on feedback from Vortexers a few months ago, we anodized them in a variety of colors: black, red & blue. We also purposefully did not anodize a small number of them to allow for one to anodize a specific color to match an individual preference.

Here are a couple of images:





The 16V intermediate shaft gears sell for $69.95 and can be ordered online at http://www.autotech.com or by calling our sales department toll-free at 800.553.1055.
Thanks again for your patience & understanding, I'm sure we've frustrated a few people but hopefully we can gain them back with the final outcome. We think they were worth the wait and hope that you do as well!

Those of you attending WaterFest 12 in New Jersey next weekend can see them up close & personal with an opportunity to purchase on-site.

Regards,
Ralph B. Hollack
Director of Operations
Autotech Sport Tuning Corp.

Modified by Ralph @ Autotech at 4:27 PM 7-7-2006


Modified by Ralph @ Autotech at 4:33 PM 7-10-2006

 

[PADILLA]

Re: Autotech 16V Lightweight Intermediate Shaft Pulleys NOW IN STOCK!!! (Wizard-of-OD)

http://****************.com/smile/emthup.gif

Sweet!!!

 

[vitocorneleus]

Re: Autotech 16V Lightweight Intermediate Shaft Pulleys NOW IN STOCK!!! (PADILLA)

Hot damn. I've been waiting for these. Now I've got to get your new cam gear too, just so everything matches.

 

[GoKart_16v]

Re: Autotech 16V Lightweight Intermediate Shaft Pulleys NOW IN STOCK!!! (vitocorneleus)

are they the same for the PL and 9a engine

 

[the brit]

Re: Autotech 16V Lightweight Intermediate Shaft Pulleys NOW IN STOCK!!! (Ralph @ Autotech)

Quote, originally posted by Ralph @ Autotech »

Those of you attending WaterFest 12 in New Jersey next weekend can see them up close & personal with an opportunity to purchase on-site.

Any word on Waterfest specials involving these and the cam gear?

 

[Ralph @ Autotech]

Re: Autotech 16V Lightweight Intermediate Shaft Pulleys NOW IN STOCK!!! (GoKart_16v)

Quote, originally posted by GoKart_16v »

are they the same for the PL and 9a engine

Yes, they fit both the 1.8L PL and 2.0L 9A

 

[Ralph @ Autotech]

Re: Autotech 16V Lightweight Intermediate Shaft Pulleys NOW IN STOCK!!! (the brit)

Quote, originally posted by the brit »

Any word on Waterfest specials involving these and the cam gear?

Those that have been to our booth at Waterfest in past years can tell you if we offer specials. Let's just say it will probably be worth your while to check us out.

 

[the brit]

Re: Autotech 16V Lightweight Intermediate Shaft Pulleys NOW IN STOCK!!! (Ralph @ Autotech)

Quote, originally posted by Ralph @ Autotech »

Those that have been to our booth at Waterfest in past years can tell you if we offer specials. Let's just say it will probably be worth your while to check us out.

Sounds good, see you on Sunday! http://****************.com/smile/emthup.gif

 

[Mortal_Wombat]

hell yes....this will be the next thing i buy for my 16v project

 

[eurojolf]

Re: (Mortal_Wombat)

cheap and effective right on! http://****************.com/smile/emthup.gif

 

[Shislerocco]

Re: (eurojolf)

i think i saw 20% off at the waterfest booth. ill be there. save me one! http://****************.com/smile/emthup.gif

 

[PowerDubs]

Re: (Shislerocco)

Picked one up for $56 at the show... http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif

If the matching cam sprocket was silver instead of black I would have bought that also...

 

[Shislerocco]

Re: (PowerDubs)

Quote, originally posted by PowerDubs »

Picked one up for $56 at the show... http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif If the matching cam sprocket was silver instead of black I would have bought that also...

i hope they have some left tomorrow. ill probably be picking up three

 

[madeurotuner]

Re: (Shislerocco)

sweeeeeet. http://****************.com/smile/emthup.gif

 

[16vgti2]

do you take paypal?

 

[Ryan @ Autotech]

Re: (16vgti2)

Unfortunately, we do not take paypal, just credit card, cash, or money orders. For those of us who swung by the booth at Waterfest, thanks for stopping by, its a bonus to see our customers in person, face-to-face instead of just another voice on the end of the line.

 

[Shislerocco]

Re: (Ryan @ Autotech)

i got one in red, white and blue, im patriotic. now just to figure out where i can put them all on my 16v

 

[16vgti2]

Re: (Ryan @ Autotech)

Quote, originally posted by Ryan @ Autotech »

Unfortunately, we do not take paypal, just credit card, cash, or money orders. For those of us who swung by the booth at Waterfest, thanks for stopping by, its a bonus to see our customers in person, face-to-face instead of just another voice on the end of the line.

no problem, ordered one already

 

[Vamped]

Any pix of it installed?

 

[Mk2enthusiast]

Re: (Ryan @ Autotech)

Quote, originally posted by Ryan @ Autotech »

Unfortunately, we do not take paypal, just credit card, cash, or money orders. For those of us who swung by the booth at Waterfest, thanks for stopping by, its a bonus to see our customers in person, face-to-face instead of just another voice on the end of the line.

indeed. appreciated the package deal with the timing gear, great promotion