VW Vortex - Volkswagen Forum banner
Status
Not open for further replies.
21 - 40 of 110 Posts

·
Registered
Joined
·
82 Posts
Re: (black forest ind)

Here's the pics I said I'd post...
1st is of new stock unit

2nd is stock guts replaced with BFI units:

3 & 4 is my welded "cup" (Just so you all don't think I was making it up)





4th with new BFI guts installed!

Maybe this will help someone else in their install...
 

·
Registered
Joined
·
3,384 Posts
Re: BFI - Polyurethane and Delrin MK3 and Rado VR6 Motor Mounts (black forest ind)

I have a B3 passat and my mounts are pretty beat. Do you have a complete kit with hardware available? I might just do the front for now idk.
 

·
Vendor
Joined
·
9,445 Posts
Discussion Starter · #24 ·
Re: BFI - Polyurethane and Delrin MK3 and Rado VR6 Motor Mounts ($rado)

Quote, originally posted by $rado »
I have a B3 passat and my mounts are pretty beat. Do you have a complete kit with hardware available? I might just do the front for now idk.

We do not offer a specific kit for the Passats as the hardware for them varies from year to year.
 

·
Registered
Joined
·
3,384 Posts
Re: BFI - Polyurethane and Delrin MK3 and Rado VR6 Motor Mounts (black forest ind)

http://****************.com/smile/emthup.gif No big deal, ill just order 1 for a mk3 when i make up my mind.
 

·
Registered
Joined
·
1,746 Posts
Re: BFI - Polyurethane and Delrin MK3 and Rado VR6 Motor Mounts ($rado)

Just installed the .5 kit for my vr and I must say, These things are amazing. I do not feel any more vibration than I did before the install.
Some words of advice for anyone doing them by themselves. Take both front wheels off, it makes it easier when accessing the rear engine mount and transmission mount.

A GREAT product BFI, will be buying more stuff from you in the future
 

·
Vendor
Joined
·
9,445 Posts
Discussion Starter · #27 ·
Re: BFI - Polyurethane and Delrin MK3 and Rado VR6 Motor Mounts (BMW4L1F3)

Quote, originally posted by BMW4L1F3 »
Just installed the .5 kit for my vr and I must say, These things are amazing. I do not feel any more vibration than I did before the install.
Some words of advice for anyone doing them by themselves. Take both front wheels off, it makes it easier when accessing the rear engine mount and transmission mount.

A GREAT product BFI, will be buying more stuff from you in the future

Thanks
http://****************.com/smile/emthup.gif
 

·
Registered
Joined
·
1,946 Posts
FV-QR

Just installed the stage 1 engine mounts this morning. These things are amazing!! Just a bit more vibration than stock, but no complaints on my end. Thanks for an awesome product, and looking forward to getting the JOM coilovers I just ordered!
 

·
Vendor
Joined
·
9,445 Posts
Discussion Starter · #29 ·
Re: FV-QR (guerilla_zoe)

Quote, originally posted by guerilla_zoe »
Just installed the stage 1 engine mounts this morning. These things are amazing!! Just a bit more vibration than stock, but no complaints on my end. Thanks for an awesome product, and looking forward to getting the JOM coilovers I just ordered!


http://****************.com/smile/emthup.gif
 

·
Vendor
Joined
·
9,445 Posts
Discussion Starter · #33 ·
Re: (wannabeeuroTR)

Quote, originally posted by wannabeeuroTR »
do any of these mounts help raise the engine any more than oem height or no ?

Our BFI Poly and Delrin mounts will only raise the engine if your current mounts have sagged, which most used factory mounts do. Our mounts are machined to match new factory mount height http://****************.com/smile/emthup.gif
 

·
Vendor
Joined
·
9,445 Posts
Discussion Starter · #35 ·
Re: BFI - Polyurethane and Delrin MK3 and Rado VR6 Motor Mounts (IlLtEKEl)

Quote, originally posted by IlLtEKEl »
where do the two larger bolts go, and does two of the middle sized bolts go on the front mount. the four small bolts are in place two of the medium sized bolts are in place creating compression on the mounts... im stumped where the last three bolts go

Perhaps this will help Mk 3 Motor Mount Installation Instructions
You can also call us for more info http://****************.com/smile/emthup.gif
 

·
Registered
Joined
·
369 Posts
Re: BFI - Polyurethane and Delrin MK3 and Rado VR6 Motor Mounts (black forest ind)

hey are there any sales going on right now on a set of mk3 poly mounts. I need some other stuff but am on a limited budget so if there is a sale I may be able to order som extras. also could a free t-shirt come with my order? haha or maybe a sweet ass sticker to add a couple hp to my ride! lol all of your help is greatly appreciated!
 

·
Vendor
Joined
·
9,445 Posts
Discussion Starter · #37 ·
Re: BFI - Polyurethane and Delrin MK3 and Rado VR6 Motor Mounts (Dezzell)

Quote, originally posted by Dezzell »
hey are there any sales going on right now on a set of mk3 poly mounts. I need some other stuff but am on a limited budget so if there is a sale I may be able to order som extras. also could a free t-shirt come with my order? haha or maybe a sweet ass sticker to add a couple hp to my ride! lol all of your help is greatly appreciated!

Sorry, we are not running any sales at the moment - If you can catch us at one of the upcoming shows you will definitely be able to save some cash http://****************.com/smile/emthup.gif
You can also join our newsletter on our website for the most up to date specials and BFI events! If you do end up placing an order with us online, just put in the comments section that you would like some "treecals" - we are happy to throw some in http://****************.com/smile/emthup.gif
 
21 - 40 of 110 Posts
Status
Not open for further replies.
Top