VW Vortex - Volkswagen Forum banner
1 - 2 of 3 Posts

· Registered
994 Posts
Discussion Starter · #1 ·
My '95 Golf CL 1.8L ACC now has a 276 cam sitting overhead.
I had to play with the ignition timing and it idles somewhere around 900rpm due to ignition timing adjustments. Of course the idle is rougher than before but it sounds much beefier and the power it definately more than noticeable prividing I have the ign. timing at the right point.
Any advice for further tuning this engine to run at it's optimum. I am running stock dual valve springs, new valve seals, new valves, new fuel filter and I polished the exhaust ports and the exhaust manifold ports about 1 - 2inches in.
I really don't know where the ign. timing should be at this point. It definately does not run at it's optimum where the ign. timing was originally with the stock cam.
1 - 2 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.