[HOTSKILLET98]

I am currently running EIP stage 2 chip on stock injectors on the VR6T OBD2. I also have an ATP 310cc chip and have a set of RC 370 cc injectors laying around. I know the EIP chip is not designed for bigger injectors. Here is the question.
What chip and injector combo would be good to run 15-18 psi? I know GTR Tim is using G60 injectors in conjuction with EIP. Thanks in advice

 

[cabzilla]

Re: Compatability EIP stage 2 with bigger injectors (HOTSKILLET98)

#24 injectors (g60) are as big as you can run w/ the EIP chip unless you increase MAF size.

 

[Peter Tong]

Re: Compatability EIP stage 2 with bigger injectors (cabzilla)

Gabe,
How'd the Cabby project go in the end?
Peter T.

 

[cabzilla]

Re: Compatability EIP stage 2 with bigger injectors (Peter Tong)

The cabby got ambushed by the gti vr6 turbo project. This winter im going to attempt a t3 <12psi setup on the cab.

 

[HOTSKILLET98]

Re: Compatability EIP stage 2 with bigger injectors (HOTSKILLET98)

The thread was about Compatability with EIP stage 2 & bigger injectors

 

[blue98jettavr6]

Re: Compatability EIP stage 2 with bigger injectors (HOTSKILLET98)

2 of my close friend had vr6 turbo and one of them played with 310cc injectors with the EIP chip. At dle it just poured unburned gas outta the exhaust un crontrollable.
if your runner a lower cr your good to run 15psi with that eip chip and stock injectors.

 

[cabzilla]

Re: Compatability EIP stage 2 with bigger injectors (HOTSKILLET98)

Quote, originally posted by HOTSKILLET98 »

The thread was about Compatability with EIP stage 2 & bigger injectors

I answered your question.