VW Vortex - Volkswagen Forum banner
1 - 2 of 5 Posts

· Registered
94 Posts
Discussion Starter · #1 ·
I'm surprised this isn't in the DIY/FAQ section. Very easy.
You don't have to install the conduit for the SAI pump. Just get a 3 dollar breather filter with a 1" inlet from an autoparts store and zip-tie/hose-clamp it to the pump hose.
You can use PVC if ABS isn't available in your area (like me.) Unfortunately PVC is heavier, but what can you do?
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.