VW Vortex - Volkswagen Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
27 Posts
The bearings look like they have seen some wear. Especially the second from the left. I would determine what the rod bearding clearance should be and use plastigauge (Plastigauge, Plastic Precision Clearance Gauges) to measure it.

The scratch should not cause a knock. If the scratch is raised then using a very fine sandpaper to take down the raised part of the scratch could be done.
 
1 - 1 of 1 Posts
Top