VW Vortex - Volkswagen Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
2,440 Posts
Discussion Starter · #1 ·
i need to know what i need to have to do this, and what i can use that i have, ive been told i can just swap the rotors in the rear, and the front i know i need the control arms, axles, rotors, hubs and wheel bearings. Is there anything else? i need to know ASAP. Thanks
 

· Registered
Joined
·
328 Posts
Re: Exactly what is needed to install a 5 lug plus setup on my G60 corrado???? (Nuzzi)

This might help: ECS Tuning (ecstuning.com) has a 5-lug upgrade kit for the Passats that uses special hubs that fit into the stock spindles. I don't know if it can be used on the G60.
 

· Registered
Joined
·
815 Posts
Re: Exactly what is needed to install a 5 lug plus setup on my G60 corrado???? (GetMore)

i have everything you need to do this from my 95 gti... it's a full 5 lug conversion. a arms, suspension, hubs, brakes, even stock gti alloys.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top