VW Vortex - Volkswagen Forum banner

Factory CD Changer Skipping - Can it be fixed???

548 views 2 replies 3 participants last post by  PanEuropean 
Re: Factory CD Changer Skipping - Can it be fixed??? (VW_Zen)

They are hard to get apart, but if you want to try to do so, take the bottom cover off and you'll see the PCB. The PCB is held on by several sscrews and a metal bend tab. Gently disconnect the ribbons and remove the PCB. You might be able to wipe the laser lens with a long tip cotton swab from there. GENTLE is the key word here.
I really don't recommend doing this and won't take any responsibility for your actions.
There are no adjustments and very very little you can do to these changers to fix them. Once they go bad, dump it in the trash and buy a new one.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top