VW Vortex - Volkswagen Forum banner
1 - 2 of 2 Posts

·
Banned
Joined
·
12,870 Posts
Re: Forge Polyurethane Frong SwayBar Bushings. Anyone got them? (Dog_Eater)

Doubt you'd even be able to tell the difference unless you really, and I mean really, pushed the car, like on a road course. I could be wrong, but if you are going to go to the trouble of putting the bushings in, I think you have to drop the subframe anyway so might as well get a real bar so you can slam it.
 

·
Banned
Joined
·
12,870 Posts
Re: Forge Polyurethane Frong SwayBar Bushings. Anyone got them? (Dog_Eater)

I ran a 2" drop on my old car with the front sway, no problem here either. But it's not far past the 2" that the swaybar will rub. I tried CPP endlinks and couldn't get rid of the rubbing.
But there isn't much room down there to swap the bushings without dropping the frame. The bushings aren't thick so I doubt there is much play in the bar no matter how soft they are.
 
1 - 2 of 2 Posts
Top