VW Vortex - Volkswagen Forum banner

1 - 13 of 13 Posts

·
Registered
Joined
·
2,122 Posts
Discussion Starter · #1 · (Edited)
gloss center with satin black hardware and 1/4" height nut/ dark grey metallic lips.17 X 10 BBS RS 2" front lip et 28ish/rear lips 3" et 18ish with falken 512 215/45 only mounted for test fit never driven on [:(] $2800

 

·
Registered
Joined
·
3,733 Posts
trade you 4 sets of wheels for your one lol:
BBS RS061 16x8 ET20
Super Advan Sa3, 17x8 ET40 5x112 steel-seat-redrilled
2 sets of Corvette Sawblades, one staggered, one square
:laugh:
 

·
Registered
Joined
·
2,122 Posts
Discussion Starter · #7 ·
what do your rs 061's look like?

trade you 4 sets of wheels for your one lol:
BBS RS061 16x8 ET20
Super Advan Sa3, 17x8 ET40 5x112 steel-seat-redrilled
2 sets of Corvette Sawblades, one staggered, one square
:laugh:
 

·
Registered
Joined
·
3,733 Posts
jrodmk2

what do your rs 061's look like?
https://forums.vwvortex.com/showthr...-RS-061-or-parts-(5x120-16x8)&highlight=RS061

I still need to detail the fourth wheel I recently purchased, which is not pictured in the above link. It is in good original un-split condition, no curb rash. Some stubborn brake dust on back after a scrub, but hoping I can trade sore fingers for perfection. Tires have been removed.

What is the original RS center #'s on these wheels? redrill I'm assuming? 17" centers? Any pics of the back and under the caps? Thanks.
 

·
Registered
Joined
·
2,122 Posts
Discussion Starter · #9 ·
https://forums.vwvortex.com/showthr...-RS-061-or-parts-(5x120-16x8)&highlight=RS061

I still need to detail the fourth wheel I recently purchased, which is not pictured in the above link. It is in good original un-split condition, no curb rash. Some stubborn brake dust on back after a scrub, but hoping I can trade sore fingers for perfection. Tires have been removed.

What is the original RS center #'s on these wheels? redrill I'm assuming? 17" centers? Any pics of the back and under the caps? Thanks.
will check them tonight, cant remember that far back haha.
redrill with steel inserts. yes, 17" centers
 
1 - 13 of 13 Posts
Top