VW Vortex - Volkswagen Forum banner

1 - 1 of 1 Posts

521 Posts
Discussion Starter #1 (Edited)
I picked up from the original owner at 89,000 miles and have converted over a lot of RS3 parts except for the motor/trans.
Due to the possibility of getting a 2.5 TFSI is extremely slim at this point, selling to move to another project I am working on.

Car currently has 152,000 on it.

The parts list / work done is massive.
-KW Clubsport Coilovers
-Swift Springs at multiple different rates
-RS3 aluminum suspension arms
-RS3 spindles all around
-RS3 brakes on car front and rear (will come with street and track pads)
-Powerflex Black bushings all around
-034 Motorsports suspension and geometry parts (everything they make for the 8P platform)
-Eurowise custom steel oil pan with higher clearance and points for turbo oil feed/drain
-3" custom 304 stainless exhaust from cats back designed to be run into from 2.5t motor
-car is 3" wider with RS3 fenders and RS3 suspension bits used
-new modified ballasts and lights (has adaptive xenon)
-tuned engine, drivetrain, and diffs

There is a ton done on the car and a good amount documented as I did a lot of the work during promotional blogging for an Automotive parts retailer.

Car is ceramic coated with Gyeon Synchro package about 6 months ago. Stored in a garage.

I will include original parts and a few goodies for the buyer.


Phone: 410-849-9749
email: [email protected]

1 - 1 of 1 Posts