VW Vortex - Volkswagen Forum banner

1 - 20 of 21 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
Hey everyone, the German Car Club of Victoria is turning 1 year old on June 12, and we would like to invite you all to celebrate with us!!!
We will be having a dyno day at Technik Tuning in Thornbury and will be including a BBQ lunch!!!
We are limited to 25 cars only, so unfortunately its first in best dressed. Most positions have already been filled by GCCV members, but we have a few spots remaining. To book your place, please send an email to me on [email protected] with your name, contact number, type of vehicle, and whether you have 4WD or not.
Details are outlined below:
Date: Saturday 12 June
Where: Technik Tuning
272 Dundas Street
Thornbury VIC 3071
When: Begins 9am, runs all day. Lunch around 1.00pm. 4WD's to run FIRST on dyno.
Cost: $35 per car. This includes 2 power runs and a printed dyno sheet. Lunch will be supplied by GCCV at no cost.
Trophies will be awarded for the following categories:
Highest output - n/a
Highest output - fi
Best presented vehicle
For further info, check out http://forums.gccv.net/showthr...=2508
Hope to see you all there
Vinnie



Modified by Vinnie320 at 7:33 AM 5-19-2004
 

·
Registered
Joined
·
5,253 Posts
Re: GCCV 1st Birthday - Dyno day & BBQ (Vinnie320)

Hi Vinnie,
Welcome to the vortex - its addictive so be careful

I'll see you there!
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #3 ·
Re: GCCV 1st Birthday - Dyno day & BBQ (GizmoGTI)

Thanks for the welcome

I have heard a lot of good things about vwvortex, so I thought I'd get off my butt and join
 

·
Registered
Joined
·
14,451 Posts
Re: GCCV 1st Birthday - Dyno day & BBQ (Vinnie320)

Dyno and lunch???? Damn, why cant you be in Canberra!!!!
Want to get a figure for the GTI once its back...
 

·
Registered
Joined
·
8,943 Posts
Re: GCCV 1st Birthday - Dyno day & BBQ (GizmoGTI)

no offence but isnt that a bit low?
Also All Out Of Angst car's pulling low numbers too, did something go wrong?
 

·
Registered
Joined
·
5,253 Posts
Re: GCCV 1st Birthday - Dyno day & BBQ ( XXX 1.8T)

Quote, originally posted by XXX 1.8T »
no offence but isnt that a bit low?
Also All Out Of Angst car's pulling low numbers too, did something go wrong?

No offence taken costa... My run was going fine then all the sudden major drop off... I'll post my dyno when I get a chance to scan it in, you'll see what I mean.
I suspect the intake pipe collapsed...
All Out of angst car started pinging - the dyno operators stopped he's run.
 

·
Registered
Joined
·
5,253 Posts
Re: GCCV 1st Birthday - Dyno day & BBQ (IML337)

Quote, originally posted by IML337 »
aren't the intake pipes on GTI/A3 metal?

There is the metal bit, but the bit between the MAF Sensor and the metal Intake pipe is soft rubber. I'm thinking to replace this metal bit and rubber pipe with a samco pipe which helps air flow and reduces shrinkage (or collapsing)..
 

·
Registered
Joined
·
8,943 Posts
Re: GCCV 1st Birthday - Dyno day & BBQ (GizmoGTI)

I havent put mine on yet been too busy
but ive also heard that Samco dont do one for A3/GTI u may want to speak to Simon at QSZ as he imports the Samco stuff http://****************.com/smile/emthup.gif
 

·
Registered
Joined
·
1,501 Posts
Re: GCCV 1st Birthday - Dyno day & BBQ (chux)

Rehhheeeelllyy!
What's the goss? This affects me directly, so I'm a bit interested.
 

·
Registered
Joined
·
5,253 Posts
Re: GCCV 1st Birthday - Dyno day & BBQ (minigolf)

ok here finally is my pwr run... any ideas folks?
BTW, I've recently changed isp's. what is with optus and hosting your own web site, do they block all the incoming tcp udp ports or something....


Modified by GizmoGTI at 12:49 AM 6-16-2004


Modified by GizmoGTI at 12:57 AM 6-16-2004
 

·
Registered
Joined
·
30,932 Posts
Re: GCCV 1st Birthday - Dyno day & BBQ ( XXX 1.8T)

Quote, originally posted by XXX 1.8T »
dont think his closing down more like moving or relocating

He is going to cease his retail operations, concentrating on wholesaling. There will be some new QSZ dealers coming on board soon ... watch this space.
 
1 - 20 of 21 Posts
Top