VW Vortex - Volkswagen Forum banner
1 - 1 of 3 Posts

· Registered
103 Posts
I'm going to be replacing mine next week. Ordered the 16v PP and clutch kit w/ install kit from Adirondack. Built a engine support this afternoon. Only evident problem I foresee is while dropping the tranny is there enough room to move it to the right, only about 2" to the side. Or am I going to have to drop down the motor a few inches?
Didn't mean to jack your post.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.