[Aj6543]

Anyone have a picture of the backside of a headlight. Reason why I ask is, that i Bought a set of used gli headlights, and there was a broken wire dangling on the backside. And the kid told that it was not needed cause it was part of HIDs he added. Also are headlights hard to install.
Thanks

 

[dennisgli]

Re: Gli Headlight (Aj6543)

Here's a picture of some E-codes if that helps. Why don't you post a picture of yours - then maybe we could help you?

 

[Aj6543]

my back headlights looks a bit different. Do you only need to plug one wire in that one place on the back? Should I leave installion to a body shop or can I do it myslef?

 

[dennisgli]

Re: Gli Headlight (Aj6543)

It isn't too hard to change the headlights - you do have to take the bumper cover off. And then aim them afterwards.

Quote, originally posted by Aj6543 »

Do you only need to plug one wire in that one place on the back?

Uh, what? Which wire? What place? Your headlight should have three wires on that side going to the connector for the 9007 bulb - probably white, yellow, and brown.
The other side should look like this -except you will have three wires going to the parking/turn signal bulb - probably green, red, and brown.

 

[Aj6543]

the wires that are cut are brown, yellow. They aren't cut clean, and therefore seem hard to put togther. Can the wires be fixed?

 

[dennisgli]

Re: Gli Headligh (Aj6543)

That would probably be the low beam and ground. What do you mean that they aren't cut clean? You should be able to splice them back together if they are cut - solder and heat shrink - or a crimp connector. Take them to a car mechanic or a car stereo/alarm shop and they should be able to do it for you.