VW Vortex - Volkswagen Forum banner
1 - 20 of 30 Posts

·
Registered
Joined
·
2,836 Posts
Re: (Grig85)

hey Erik looking good brother http://****************.com/smile/emthup.gif
common do it up and i hope to see you at brokedown tucking those 19's
 

·
Registered
Joined
·
2,836 Posts
Re: (Grig85)

i am trying to remember how that front looks on a passat. I believe there should be a bump stop looking thing on top if that bushing , if i remember correctly it acts like a spacer in between those two pieces of aluminum.
 

·
Registered
Joined
·
2,836 Posts
Re: (Chet Ubetcha)

erik why didn't you come out for brokedown??, i had great time.
looking ridiculous btw http://****************.com/smile/emthup.gif
 

·
Registered
Joined
·
2,836 Posts
Re: (Grig85)

Quote, originally posted by Grig85 »

BTW, that poly piece plays no part in how low the car can get, my upper control arms buttom out at 40psi.

Modified by Grig85 at 3:54 PM 9-20-2008

Hey Erik looking good man, i think next step is to cut the body for the control arms, i just checked on a new S5 they have it cut out with a plastic cup covering it, i dont know whats the purpose audi did that but its looks like it is easy to do.
 

·
Registered
Joined
·
2,836 Posts
Re: (Grig85)

Hey Erik hook me up with some high resolution pics of that last photoshoot.
i want it for my wallpaper http://****************.com/smile/emthup.gif
 

·
Registered
Joined
·
2,836 Posts
Re: (Grig85)

Quote, originally posted by Grig85 »

7 should be enough for me, I figured out the way to blend it with the theme of the car.

and i already know your plans, should i tell?
 

·
Registered
Joined
·
2,836 Posts
Re: (Grig85)

Bagyard quality amazes me everytime i see their custom work http://****************.com/smile/emthup.gif
http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif
 

·
Registered
Joined
·
2,836 Posts
Re: (Grig85)

can''t wait to see the results , i recommend mounting the tires on the rims and after that painting them, otherwise you will ruin the paint when mounting them.
так что даже не думай их красить до того как поставиш на диски.
 

·
Registered
Joined
·
2,836 Posts
Re: (Grig85)

Quote, originally posted by Grig85 »
I called them today and they said it should be done late tomorrow

is it tomorrow already?
i need to see them now.
 

·
Registered
Joined
·
2,836 Posts
Re: (Grig85)

Quote, originally posted by Grig85 »


looking sweet http://****************.com/smile/emthup.gif
how is that whitewall paint? looks to me little thick , is it flexible at all?
i like to see those on the carrr

i bet it's gonna look retarded in a good way .


Modified by Rat4Life at 1:31 AM 2-28-2009
 

·
Registered
Joined
·
2,836 Posts
Re: (shagnwagn118)

Quote, originally posted by shagnwagn118 »
not sure if you need center caps but you can always try bullet style fence post caps. the press right into my 5x100 steelies (but then one fell out cause of a huge bump)

more info on those caps?
 

·
Registered
Joined
·
2,836 Posts
Re: (CiDirkona)

Quote, originally posted by CiDirkona »

... numbers and google-math seem to line up about right...
http://www.fence-it.com/chainl...7.htm

don't get it how would those fit into the rear wheels,cause the hub is actually sticking out , if i remember correctly.
 

·
Registered
Joined
·
2,836 Posts
Re: (Grig85)

Quote, originally posted by Grig85 »
lol. no its -10C outside I will freez my ass off.
but I picked up a set of HRE 546s so those are also in line for fitment
I hope it gets warmer ASAP
5x112 20x9.5 with stagged offset
20" wheels - ze moar rim tuck ya!!
I cant even imagine how they will look when I pull bump stops out of the rears




Modified by Grig85 at 4:54 PM 3-2-2009

Modified by Grig85 at 5:20 PM 3-2-2009

omfg those look even better than ones you show me before.
bastard

where you gonna get the tires?
and what size?
 
1 - 20 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top