VW Vortex - Volkswagen Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
8,500 Posts
Re: h&r cupkit vs weitec gt (phil9922)

cupkit http://****************.com/smile/emthup.gif
the stuff doesn't come assembled (obviously) for shipping/transportation reasons, but it all just slips together pretty easy.
 

·
Registered
Joined
·
10,393 Posts
Re: h&r cupkit vs weitec gt (germanrox)

Weitec is same as the cup kit in that regards....doesn't come assembled due to shipping, but goes together in a minute http://****************.com/smile/emthup.gif
 

·
Registered
Joined
·
8,500 Posts
Re: h&r cupkit vs weitec gt (OnelowcabriO)

Evolution Sports gets my vote. Plus he is local to me http://****************.com/smile/emthup.gif 425-710-9200 tues-sat 10-7 mk3 cup kit is like $600 or so. Comes with nice new bushings and bumpstops and everything to make it a complete kit. http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif
 

·
Registered
Joined
·
3,490 Posts
Re: h&r cupkit vs weitec gt (OnelowcabriO)

The weitec kit (at least the 40/40 i bought) is around two hundred dollars cheaper. The best prices i found for the H&R was about $600, and the weitec at about $400 from Rapid Parts.
 

·
Registered
Joined
·
842 Posts
Re: h&r cupkit vs weitec gt (phil9922)

used the spring compressors in the front (they are a female puppy dog to get off then. did not need them in the back just needed a person to push down on them
 

·
Registered
Joined
·
629 Posts
Re: h&r cupkit vs weitec gt (phil9922)

quote:[HR][/HR]so after i put the spring on the strut i dont need to compress it to screw the end piece on?[HR][/HR]​
I needed to use a spring compressor to take the stock struts apart, but I was able to put the H&Rs together without it.
 
1 - 12 of 12 Posts
Top