VW Vortex - Volkswagen Forum banner
1 - 13 of 13 Posts

· Registered
Joined
·
4,657 Posts
Re: Heater core? lines in the way of t3/t4 inlet with atp manifold on jetta 1.8t? (Sleepy Mk1)

It'll fit, it's just gonna be a . Trust me, been there done that. I remember trimming off some of the 90 degree silicone elbow for clearance (on the part that connects to the kompressor inlet). Lube it up a little and it'll slide on.
I feel your pain. http://****************.com/smile/emthup.gif
 

· Registered
Joined
·
442 Posts
Discussion Starter · #8 ·
Re: Heater core? lines in the way of t3/t4 inlet with atp manifold on jetta 1.8t? (EvilVento2.oT)

bending is almost impossible but some slight movement is possible.... I'm still working on a better solution........ keep posted for completed project pics and specs coming up in the next 2-3 weeks
 

· Registered
Joined
·
4,657 Posts
Re: Heater core? lines in the way of t3/t4 inlet with atp manifold on jetta 1.8t? (1POINT8Terry)

Quote, originally posted by 1POINT8Terry »
besides that the 1.8t manifolds only go on one way

not if you pull the studs from the head and weld the manifold to it ...
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top