VW Vortex - Volkswagen Forum banner
1 - 1 of 3 Posts

· Registered
1 Posts
Re: HELP! Crank but no start... (CQinMD)

Did you try to run the diagnostics from your OBD? http://www.20v.org explains how to buils the tool from LED. The codes are in Bentley (if you don't have Bentley, just google them). There is a chance that your distributor hall sensor might be out of alingment. Take the distributor lid of, and line up the mark on the cover with mark on distributor body. All these marks have to line up when the marks on your pullys are set to TDC. If the ECU doesn't receive the signal from the distributor hall sender at the right moment, it will not fire.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.