VW Vortex - Volkswagen Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
660 Posts
Discussion Starter · #1 ·
WAS HOPING THAT SOMEONE COULD POINT ME IN THE RIGHT DIRECTION. JUST SWAPED THE OLD 8V WITH A G60 INTO FREINDS 89 JETTA AND DONT KNOW WHAT WIRES I NEED TO SPLICE COMMING OFF THE ECU. USING G60 ECU AND HARNESS. FIRST MOTOR SWAP SO WERE KINDA CONFUSED. DONE A SEARCH BUT CANT FIND WHAT I NEED. PICTURES ARE WELCOME.
THANKS
 

·
Registered
Joined
·
1,180 Posts
Re: HELP! G60 SWAP NO START (POWPOW22)

Is the 89 CE1 or CE2?? If CE2 then There is no need to splice anything just unplug your DigiII wiring and plug in the Digi I harness in. I did one last year on my jetta and had lots of help from the forums and not to mention Twinscrew20v. He was cool enough to let me call him all the way down in Arizona and bug him with my questions. Great guy and awesome car http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top