Joined
·
394 Posts
Re: Help me visualize the "U" shaped flange tool (thescirocco.com)
I used the u shaped part off of an old a2 a/c adjustment mount, just cut it to about 5-6 inches on both sides. i used 2 m10 bolts about 5 inches long and just welded the head to head. works just as well and free! the u part really gives you decent access to the circlip.
I used the u shaped part off of an old a2 a/c adjustment mount, just cut it to about 5-6 inches on both sides. i used 2 m10 bolts about 5 inches long and just welded the head to head. works just as well and free! the u part really gives you decent access to the circlip.
