[Danno13]

Kinda weak question here, but I cannot get it for the life of me.

I figured hold the bottom nut and then turn the top, or vise versa, but all I managed to do was loosen it all and now i cannot get it to tighten back up.

 

[S4mig]

Re: Help with removing power steering line (Danno13)

Are you removing it or reinstalling it? Good chance the threads in the pump stripped.

 

[Danno13]

Re: Help with removing power steering line (S4mig)

well i wanted to remove it, got it loose, but never off. Now i cant tighten it up with out kinking the line

 

[S4mig]

Re: Help with removing power steering line (Danno13)

I'd go ahead and get the proper sized flare wrenches and try to get the lower and upper nuts to break free from eachother. Worst case scenario you are going to have to cut the line and replace it with a new line.

 

[Danno13]

Re: Help with removing power steering line (S4mig)

Thanks, I have the right wrenchs, just didnt want to strip something

 

[OTIS311]

Re: Help with removing power steering line (Danno13)

man i remember removing mine, wasnt fun. i ended up torching it for awhile.