VW Vortex - Volkswagen Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
191 Posts
Discussion Starter · #1 ·
Ok, I know this has been asked a million times but search is down. I have my airbox out now and I would like to mod it while it is out. I want to know where to cut or drill or whatever, thanks.
 

·
Registered
Joined
·
8,778 Posts
Re: How to ghetto mod airbox? (bobfish)

I can't find the damn pics

I did the same mod...You have to cut out the flattened piece on the fender side of the airbox. The piece that has the black oval rubber...it the opening that the air comes in from the fender snokel. You will see the devider inside the airbox...you simply take a dremmel and cut that out also http://****************.com/smile/emthup.gif
Your done...now drop in an ITG filter and enjoy
You can also try to IM "chris86vw" and ask him to email you pics http://****************.com/smile/emthup.gif
Good luck
 

·
Registered
Joined
·
528 Posts
Re: How to ghetto mod airbox? (apr_tuned_jetta)

my vr6 used to peel out soo much when i just mash the gas(auto) but ever sinse i did the mod, it doesn't want to peel anymore.
where can i buy a igt filter.
anyone know the problem to my peelouts?
 

·
Registered
Joined
·
10,725 Posts
Re: How to ghetto mod airbox? (apr_tuned_jetta)

what i did is that i took a 3" home depot aluminum dryer hose, run it from the bottom right air vent (where CAIs usually sit), up to the airbox, and cut a 3" opening in the airbox, use duct tape to ensure it is somewhat airtight, so i have a cold air-ram air intake. it works, trust me, and this ain't jsut for the sound.
 
1 - 7 of 7 Posts
Top