VW Vortex - Volkswagen Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
3,269 Posts
Re: How to install Hella tinted sidemarkers (bobby_t1)

ok this way is really simple i did it and i suck at doing things on my car
inside your wheel arch there are 2-3 little plastic nubs the nubs hold the plastic liner for the wheel well in place i took the one closest to the ground out and put my hand through till i could feel the light i have big arms it was pretty tight might want to pull out 2 of the "nubs" to get enough clearance anyway when u feel the light trace your finger toward the rear of the light rear meaning toward the back of your car and you will feel a metal clip if you push the clip toward the front of the car and outward it will pop the light out with out breaking it then just plug in the light to the new smoked one then place the front part of the side marker in first followed by the side with the metal clip this worked well for me hope it works for you
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top