VW Vortex - Volkswagen Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
517 Posts
Discussion Starter · #1 ·
Hey guys! Recently I had replaced the lower control arm bushings in the front of my Gti. My originals were destroyed! I replaced with the poly set from MJM Autohaus. Well sad to say it but within 8 months of not to often driving... There destroyed too:thumbdown: So I tried looking up the pro's and con's of poly, hybrid, and r32 bushings but as we all know thw search has gone into suck mode since the forum interface changed. So I am looking for feedback on the hybrid set that MJM offers http://www.mjmautohaus.com/catalog/...Arm_Set_with_Hybrid_Bushings&products_id=3469 and also feedback on the R32 bushings. If im reading correctly there pretty similar if not pretty much the same. So any feedback is mucho appreciated. Thanks:thumbup:
 

· Registered
Joined
·
12,232 Posts
R32 bushing for the rears without question, and whatever for the smaller front one. You cannot use any of those red solid poly bushings on the back because of the geometry of the stock setup.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top